WEIL BS 702
WEIL gyratory crusher used as a secondary or tertiary crusher in quarries and aggregate processing plants. Available in two versions, FN (fines) and EG (chippings), according to the feed particle size.
Two versions for two particle sizes
The BS 702 fits into secondary or tertiary crushing of a processing line. To understand its operating principle, see the page gyratory crushers. It is particularly suited to the production of aggregates in quarries.
BS 702 FN
Version fines — feed 8–25 mm, maximum size 60 mm. Optimised for finished products from 0–5 to 0–20 mm.
BS 702 EG
Version chippings — feed 25–70 mm, maximum size 90 mm. Covers finished products from 0–15 to 0–40 mm.
Main data
| Specification | BS 702 FN | BS 702 EG |
|---|---|---|
| Feed particle size | 8–25 mm | 25–70 mm |
| Maximum feed size | 60 mm | 90 mm |
| Motor power | 45 kW | 45 kW |
| Total installed weight | 5,2 t | 5,2 t |
| Empty weight | 3,7 t | 3,7 t |
| Heaviest part | 1,2 t | 1,2 t |
Indicative throughputs by finished product
| Final product | Capacity |
|---|---|
| 0–5 mm | 10–20 t/h |
| 0–8 mm | 15–25 t/h |
| 0–10 mm | 20–30 t/h |
| 0–12 mm | 23–33 t/h |
| 0–15 mm | 26–36 t/h |
| Final product | Capacity |
|---|---|
| 0–10 mm | 15–25 t/h |
| 0–12 mm | 23–33 t/h |
| 0–15 mm | 26–36 t/h |
| 0–18 mm | 30–37 t/h |
| 0–20 mm | 34–40 t/h |
| 0–25 mm | 35–45 t/h |
The performance figures given apply to dry, clean materials of medium hardness.
What the BS 702 delivers
- Hydraulic setting of the opening
- Direct drive without gearbox
- Automatic and manual mode of the electrical control
- Double labyrinth sealing against dust and water
- Automatic overload protection
- High productivity with low energy consumption
- Immediate restart under load possible
Control & automation
WEIL designs the control, supervisory and automated lubrication systems needed to integrate this crusher into your plant.
Overall dimensions
| Mark | Value |
|---|---|
| A | 3350 mm |
| B | 1450 mm |
| C | 1915 mm |
| D | 1420 mm |
| E | 215 mm |
| F | 390 mm |
| G | 3200 mm |
| H | 50 mm |
Our engineers confirm the match to your materials.
Particle size, target throughput, line configuration: tell us what you need and we will reply within 48 h.